PIC16F84 12 or 24 Hour Digital Clock Circuit Diagram And Programming
This PIC digital clock is based on a
16F84 microcontroller. it uses four 7-segment displays.The software in
the microcontroller allows for very accurate timekeeping.
| PARTS LIST | |
| R1 – R8 | 100Ω |
| R9 | 10kΩ |
| R10 R13 | 10kΩ |
| C1 | 22pF |
| C2 | 22pF |
| D1 | LED |
| U1 – U4 | Common Cathode 7 Segment Display |
| Q1 – Q4 | C828 |
| Xtal1 | 4 MHz Crystal |
| IC1 | 7805 Regulator IC |
| PIC1 | PIC 16F84 OR PIC16F84A |
| PB1 -PB3 | Push to ON push button switch |
PB1 for set minutes.
PB2 for set hours.
PB3 for Reset.
D1 LED indicate seconds.
Notes:
- Design this circuit diagram on veroboard or pcb using 18 pin IC base.
- Program your PIC (pic16f84 or pic16f84a) using PIC Programmer with ic-prog programmer software and this .HEX file. You can follow these instructions.
- Install PIC on IC base.
- Supply power to your circuit and set time using PB1 and PB2.
Thats all.
PIC16F84 Pin Configuration
Also provided asm files, so you can develop or modify this clock circuit.
 |
 |
No comments:
Post a Comment